Minn Kota Endura C2 Transom Mount Electric Trolling Motor

Minn Kota Endura C2 is a group of transom mount trolling motors differing in thrust and shaft length. These electric trolling motors operate at 12V, they are easy to use, very durable and reliable and are for a reason very popular fresh water electric trolling motors.

Minn Kota Endura C2 can be used for brackish and salt-water, but this is not recommended by the manufacturer.

minnkota endura c2 2

Minn Kota Endura C2 Features and Specifications

All Minn Kota Endura C2 electric trolling motors share the same design philosophy, differing mostly in shaft length and thrust.

Most important features of Minn Kota Endura C2 electric trolling motors is given in the following table:

Model Endura C2 30 Endura C2 40 Endura C2 45 Endura C2 50 Endura C2 55
Thrust

30 pounds
~13.6 kg

40 pounds
~18.1 kg
45 pounds
~20.4 kg
50 pounds
~22.6 kg
55 pounds
~24.9 kg
Max. Current 30 Amps 42 Amps 42 Amps 50 Amps 50 Amps
Circuit Breaker 50 Amps 50 Amps 50 Amps 60 Amps 60 Amps
Voltage 12V 12V 12V 12V 12V
30-Inch (~76.2 cm) Shaft Yes No  No  No  No 
36-Inch (~91.5 cm) Shaft No Yes Yes  Yes  Yes 
42-Inch (~106.7 cm) Shaft No No  No  Yes  Yes
Speeds 5 Fw, 3 Rv 5 Fw, 3 Rv  5 Fw, 3 Rv  5 Fw, 3 Rv  5 Fw, 3 Rv 
Telescopic Handle Yes Yes Yes Yes Yes
Amazon Link Endura C2 30 Endura C2 40 Endura C2 45 Endura C2 50 Endura C2 55

Note: Amazon links open in the new windows, feel free to check them for the most up-to-date offers and prices.

Minn Kota Endura C2 electric trolling motors are designed for fresh water use. If you are going to use them for brackish or salt-water (not recommended by the manufacturer), after each use rinse them with fresh water well and dry them using a dry cloth.

minnkota endura c2 1

Minn Kota Endura C2 features bracket made from reinforced composite material with increased resistance to flexing, warping and UV radiation, featuring 10 positions and quick-release lever lock.

In order to adjust to the user, handles are telescopic, with 6 inches (~15.2 cm) range of motion.

Shafts are also made using composite materials, making them very durable - they flex on impact and doesn't break or shatter so easily. Also, they don't corrode.

shaft prop

Props are designed to maximize efficiency and if required, to cut through heavy vegetation. This is great feature, but one that should not be abused.

As trolling motors, Minn Kota Endura C2 are very quiet, allowing the fisherman to access desired fishing positions without spooking the fish.

 How to Choose the Right Minn Kota Endura C2 Model?

Sizing the right Minn Kota Endura C2 depends on many things, but mostly according the boat weight.

The following table lists electric trolling motors general recommendations regarding boat weight and motor thrust:

Boat Weight (pounds) 2000 2500 3000 3500 4000 5000
Boat Length (feet) <16 ~17 ~18 ~19 ~20 21+
Minimum Recommend Thrust (pounds) 40 50 60 70 80 >100
Recommended Thrust With Power Reserve (pounds) 55 55/80 80 86 101 >112

Even the strongest Minn Kota Endura C2 (55 pounds of thrust) is recommended only for boats weighing less than 2000 - 2500 pounds (900 - 1130 kg).

But, this is just a general recommendations, since this table doesn't take into account wind, currents, boat type and similar.

For example, Minn Kota Endura C2 are commonly used on inflatable boats with transom mount, or they even use transom mount kits to mount the motor.

Such boats can be very susceptible to windy conditions and as such, they may require plenty of reserve thrust in order to safely come to the shore.

For larger boats, either go for two 40-55 pounds motors or choose single, stronger electric trolling motor.

Trolling Motor Power Center

minnkota trolling motor power centerThe simplest and safest way to power small electric trolling motor on a small boat is by using trolling motor power center box.

Such unit contains the battery, protect it from splashing water, preferably featurs battery power meter, allows the fisherman to power additional devices like fish finders, to charge the smart phone and similar.

For example, Minn Kota Trolling Motor Power Center accepts BCI group 24- and 27- size batteries and is commonly used for powering Minn Kota transom trolling motors.

Recommended Trolling Motor Batteries

Depending on the motor size, maximum electric current of Mnn Kota Endura C2 motors ranges from 30 to 50 Amps.

Since these motors operate at 12V, one single deep-cycle or dual-purpose battery is enough.

Size of the electric trolling motor battery determines how long battery can supply energy for the motor to operate and is usually calculated at the motor's full power.

upg ub121000 1mFor example, very popular UPG UB121000 Deep Cycle AGM Battery is BCI Group Size 27 marine battery, suitable for deep discharge applications.

Fully charged UPG UB121000 battery, when being discharged down to 10.5 volts, can supply ~52 Amps for an hour and ~31 Amps for two hours.

As such, it can power Minn Kota Endura C2 55 for at least 1 hour at full throttle and Minn Kota Endura C2 30 at least 2 hours at full throttle.

Since these electric trolling motors feature 5 Forward and 3 Reverse speeds, running these motors at lower speeds can significantly prolong the running time on a single battery charge.

For shorter distances, smaller and lighter batteries are also possible, and if the weight of the battery is very important, consider buying lithium ion deep cycle marine battery, for example Battle Born 100 Ah 12 Volt LiFePO4 Deep Cycle Battery model.


Long Story Short: If you are looking for affordable and durable electric trolling motor and Endura C2 motors fit your needs, consider one of them. After all, there are many reasons why these models are one of the most popular electric trolling motors on the market for a long time.

For more reviews and recommendations, check Minn Kota Endura C2 Transom Mounted Trolling Motor Amazon link (link opens in the new window).